PKZ2/S-SP (120V AC)

FULL VOLTAGE, NON REVERSING STARTER WITHOUT A TRIP MODULE. THESE ARE ALSO AVAILABLE IN 24V, 220V, 240V AND 480V. PLEASE CALL 800.222.5129 TO CHECK AVAILABILITY.


Click here to view a specification file on the Moeller PKZ2

Never confuse imitation with innovation!

Moeller designed the first PKZ “motor protective controller” in 1932! Since then, the term “PKZ” has become synonymous worldwide with these types of devices, regardless of manufacturer. Eight decades of continuous innovation has resulted in today’s best technology, built from the ground up, only by Moeller.

The Swiss Army Knife® of motor control

The base PKZ2 controller combines single-break power contacts with Class 10 thermal overload protection and current limiting short circuit protection to manually control motor loads. The PKZ2 can also be equipped with a high capacity contactor for remote control of individual or group motor loads. Collectively, the PKZ2 family is UL and CSA listed for a wide range of uses including:

Manual Starter applications

Group Fusing applications

Motor Disconnect means

Type E, Self-protected, Combination Starter applications

Multi-motor Starter Combination applications

Tap Conductor protection

Excellent control & protection with one frame size!

PKZ2 devices have a 42 amp continuous current rating. They control and protect motors to 30HP at 480V or 25HP @ 600V with one frame size. Their excellent current-limiting design clears fault currents of 100 KAIC at 240VAC; 65KAIC at 480VAC; and 42KAIC at 600VAC (all values RMS Symmetrical). The total clearing time of the device at the highest fault condition is a maximum of 3.5ms at 480V and 4.0ms at 600VAC.